Saving And Loading Scenes - RGBlink mini-mx User Manual

Hide thumbs Also See for mini-mx:

Table of Contents

3.8 Saving and Loading Scenes

mini-mx save presets to Scene in real time. If users want to quickly load current preset next time,

just save it to corresponding scene. The Scene will save all the currently set parameters including

Chroma Key, PTZ Presets and more. Therefore when user needs to load a preset, push

corresponding Scene for quick calling.

1) After setting the effect, push MENU Button to enter MENU, then tap 【SCENE】 or push Button

4 to enter the interface. You can also long press PREVIEW window or single click PROGRAM

window in Main Interface to quickly enter following interface for preset calling or saving.

The preset saving interface is shown as below. Click

for page up or page down.

2) mini-mx allows user to save 16 presets in total to the corresponding View 1~16. Long press

Preview Window in Editing Interface or Main Interface, and you can choose whether to form a

static picture of the current scene and save it or not. mini-mx can save the formed picture to

| support@rgblink.com | www.rgblink.com

Ph: +86 592 5771197

Table of Contents

Do you have a question about the mini-mx and is the answer not in the manual?

Mini series 230-0004-01-0