RGBlink mini-mx User Manual page 39

and simultaneously control FOUR cameras.
Example 1: mini-mx controls ONE camera.
1) Connect mini-mx and the camera directly via an Ethernet cable；
2) Enter IP address of the camera in the following interface and then click "Enter" to save. (Note:
The IP address of mini-mx and camera controlled should be in the same LAN.）
Example 2: Use mini-mx and switch to control FOUR cameras.
1) Use the ping command to analyze network connectivity, check if IP address of mini-mx and the
cameras are occupied, operations please refer to FAQ.
2) Enter PTZ configuration interface below to set the camera's IP address, then click "Enter" to
save. (Make sure IP address has not been occupies, and IP address of mini-mx and camera are in
the same LAN.)
© Xiamen RGBlink Science & Technology Co., Ltd.
| support@rgblink.com | www.rgblink.com
Ph: +86 592 5771197
38