Lifting The Vehicle With Hydraulic Lifts, Lifting Points - Fayat Group DYNAPAC SC2500WS Operating Instructions Manual

8.1

Lifting the vehicle with hydraulic lifts, lifting points

1
f The hydraulic lift must be rated for at least 10t.
f Always choose a horizontal surface with adequate load rating as installation surface
for the hydraulic lift!
f Make sure that the hydraulic lift is securely and correctly positioned!
The hydraulic lift is only intended to lift a load and not as a support. Work should only
f
be performed to and under raised vehicles when they have been secured and cor-
rectly supported to prevent them from tilling over and rolling or sliding away.
f Roller-type jacks must not be moved when under load.
f Chocks or supporting beams positioned so that they cannot be shifted or tilted must
be adequately dimensioned and be able to take the corresponding weight.
There must not be anyone on the vehicle while it is being lifted.
f
f All raising and lowering work must be carried out uniformly with all hydraulic lifts in
use! Always check and observe horizontal alignment of the load!
f Always carry out raising and lowering work with several people together, with an ad-
ditional person monitoring progress!
f Only positions (1) and (2) in the left and right side of the vehicle are permissible
lifting points!
2
2
C 13 27