Fayat Group DYNAPAC SC2500WS Operating Instructions Manual page 379

8.2 Fitting the height sensing device
Fit the sensor arm to the required side of
the machine.
- Place the holder (1) on the corre-
sponding journal (2) of the side shield
and fasten with the pin (3), bush (4)
and spring washers (5).
- Tighten the pin (3) so that the sensor
arm is just still able to swivel.
Mount the spring washers (5) in the op-
A
posite direction
The sensor arm can be secured on the
A
side shield with the lock (6).
8.3 Mounting the grade control system
Insert the grade control system into the
clamp bracket (1) and secure with the
clamping bolt (2) to prevent rotation.
3 4
1
6
2
F0258_A1.TIF/
5
2
1
E 13 47