Table of Contents
Advertisement
11.2
Electrical connections side board - screed PLC version
2a
1a
1
3
6
9
8
7
6
8
Prepare or make the following electrical connections when the mechanical compo-
nents have been mounted and set up:
- Set remote control on holder (1), tighten knurled screw (1a).
- Connect the plug of the lead (2) with the socket (2a) on the remote control.
m
If the remote control is not mounted, the plug has to be set on the bridge socket (3).
- Connect the connection lead (4) of the side board with the socket (5) of the screed.
The cover of the extendable part must be removed to install the cables.
A
Install the cables to rule out the risk of any damage to the cables.
1
6
7
8
9
7
2
3
4
5a
5
4
E 13 65
Advertisement
Table of Contents
