Table of Contents
Advertisement
5.5
Material shaft, hinged - auger Type A-
To close the gap between auger box and
side board of the screen, hinged
material shafts can be fitted to both sides
of the auger.
The hinged material shafts swivel
A
up due to the material pressure which
is exerted and swivel in due to screed re-
traction.
- Mount the left/right material shafts on
the auger box with the relevant as-
sembly parts (1).
If a terminal bearing is mounted for the
A
existing
auger
plate (2) also has to be fitted.
- Fit the plate (3) to the hinge (5) using
the hinge rod (4).
The hinged material shaft can be se-
A
cured with the assembly parts (6) in
swivelled in position when transporting
the machine in its basic width.
The assembly parts (6) can be kept at
A
the hole (7).
E 13 40
width,
the
adapter
2
1
7
4
5
3
6
Advertisement
Table of Contents
