Fayat Group DYNAPAC SC2500WS Operating Instructions Manual page 578

Paver finisher
Table of Contents

Advertisement

6
Preserving the paver finisher
6.1
Shutdowns for up to 6 months
- Park the vehicle in a place where it is protected from great exposure to direct sun-
light, wind, humidity and frost.
- Grease all lube points in accordance with specifications. Allow optional central lu-
bricating unit to run if necessary.
- Change oil in diesel engine.
- Seal exhaust silencer to make it airtight.
- Remove batteries, charge them and store them in a well ventilated place at room
temperature.
m
Recharge removed batteries every 2 months.
- Protect all bare metal components, e.g. piston rods on hydraulic cylinders, with a
suitable corrosion inhibitor.
- If it is not possible to park the vehicle is an enclosed building or under cover, it must
be covered with a suitable size of tarpaulin. In all cases, seal all air intake and ex-
haust apertures with plastic film and adhesive tape.
6.2
Shutdowns lasting from 6 months to 1 year
- Carry out all the actions listed for "Shutdowns of up to 6 months".
- Once the engine oil has been drained off, fill the diesel engine with a manufacturer-
approved grade of preserving oil.
6.3
Recommissioning the machine
- Reverse all the steps described in the "Shutdown" sections.
F 100 8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dynapac sd2500w897898

Table of Contents