Table of Contents
Advertisement
Item Designation
69
Lift screed
Paving stop + relief
pressure / Lower
70
screed + floating
position
Brief description
Pushbutton function with LED feedback:
- For lifting the screed (LED ON) and for switching off
the "Screed floating position" function
m
Check whether the screed transport safeguard is inserted!
On actuation, the levelling function in AUTO mode is
A
switched off.
f
On actuation, heed danger zones of moving parts of
the vehicle!
Button with detent switch function and LED feedback
The main function switch must be set to the OFF position.
A
- Button function: Press the button briefly until LED ON.
The screed is held in paving stop + relief pressure.
m
Screed may lower slowly!
- Press and hold the button to lower the screed at
higher speed.
- Resting function: Press the button briefly (LED ON) -
the screed is lowered. Press the button briefly again
(LED OFF) - the screed is stopped.
- Screed floating position: Pressing the button switches
the LED ON and the screed is in readiness in the
"floating position", which is activated via the swivelled
out drive lever.
- Switch off by pressing the button again or via the lift
screed button.
During paving, the screed always remains in its floating
A
position. During intermediate stops (drive lever in centre
position), the screed is switched to stop paving + relief
pressure.
Check whether the screed transport safeguard is inserted!
m
f
On actuation, heed danger zones of moving parts of
the vehicle!
D 13 51
Advertisement
Table of Contents
