Table of Contents
Advertisement
Push roller crossbar, adjustable
For adaptation to various truck design
types, the push roller crossbar (1) can be
shifted to two positions.
The adjustment travel is 90 mm.
A
- Close the hopper halves to lift the hop-
per flap (2).
- After removing the bolts (4), remove
the locking plate (3) on the lower side
of the crossbar.
- Remove insert plate (5).
- Move the push roller crossbar as far
as it will go to the front / rear position.
Shift the push roller crossbar at the tow-
A
ing eye (6) or use a suitable assembly le-
ver in its guide (left and right) to push it
into the corresponding position.
- Turn the insert plate (5) 180° and rein-
sert into the groove in the front or
rear position.
- Properly reinstall the locking plate (3)
with bolts (4).
D 31 36
2
6
3
4
4
3
5
1
Advertisement
Table of Contents
