Separator fluid spraying system (o)
Used to spray the parts coming into
contact with asphalt with a separator
emulsion.
Variant (A): hose package
Variant (B): Hose reeling device
- Possibly connect the spray hose (1)
with the connecting piece (2).
m
Only switch on the spraying system
when the diesel engine is running; other-
wise, the battery will be discharged.
Switch off after use.
- Pull the hose out of the device until a
click is audible. When released, the
hose automatically engages here.
The hose is automatically retracted
into the guide after pulling and dis-
charging again.
- Actuate button (3) to activate and de-
activate the pump.
- The indicator lamp (4) lights up when
the emulsion pump is running.
- Actuate the manual valve (5) to spray.
f
Do not spray into open flame or on hot
surface! Danger of explosion!
The spraying system is fed by a tank (6)
A
at the vehicle step.
f
Refill the canister only while the vehicle
is stationary!
- If the system is not in use, place the
spray lance (7) in the provided holder (8).
- If the spray hose is not in use, it can be placed in its bracket (9).
- Change filter (10) as necessary.
9
10
7
A
8
10
B
7
8
5
6
1
2
5
3
4
6
1
2
3
4
D 31 27