Table of Contents
Advertisement
CAUTION
CAUTION
Cleaning:Do not use any inflammable substances (such as petrol).
f
Avoid directly cleaning electrical parts and insulation material with a steam jet; cover
them up beforehand.
Working in enclosed environments: Exhaust fumes must be conducted into the
f
open air. Propane gas bottles must not be stored in closed rooms.
m
In addition to these maintenance instructions, the maintenance instructions issued by
the engine manufacturer must be adhered to under all circumstances. All mainte-
nance work and service intervals itemised here are binding in nature.
Information on how to maintain the optional equipment can be found in the individual
A
sub-sections of this chapter!
F 10 2
Hot surfaces!
Surfaces including those behind covering parts, together
with combustion fuels from the engine or screed heater can
be very hot and cause injuries!
- Wear your personal safety gear.
- Do not touch hot parts of the vehicle.
- Only perform maintenance and repair work after the
vehicle has cooled down.
- Comply with all further information in these instructions
and in the safety manual.
Danger due to electric shock
Injuries can be caused by touching live parts directly or
indirectly!
- Do not remove any protective safeguards.
- Never spray water on electric or electronic components.
- Maintenance work to the electric system should only be
carried out by trained specialist staff.
- When equipped with electric screed heater, check the
insulation monitoring every day according to the
instructions.
- Comply with all further information in these instructions
and in the safety manual.
Advertisement
Table of Contents
