1.2
Points of maintenance
Engine fuel tank (1)
- Check the filling level using the dis-
play on the operating panel.
Fill the fuel tank each time before start-
A
ing work so that the fuel system cannot
"run dry" and time-consuming venting
(bleeding) can therefore be avoided.
For filling with fuel:
- Remove cover (A).
- Fill in fuel through the filling port until
the required fill lever is achieved.
- Replace the cover (A).
Clean the tank and system:
- Unscrew the drain plugs (B) in both
tanks and drain about 1 l fuel into a
collection pan.
- When fastening the screw again after
draining, make sure to use a new seal.
B
B
A
F 55 7