Table of Contents
Advertisement
Conveyor drive - drive chains (2)
To check the chain tension:
At the chain protection is a scale (A)
A
which indicates the dip of the chain.
- Move the chain in the long hole of the
chain protection:
If the tension has been set properly, the
chain must be able to move freely ap-
prox. 10 - 15 mm.
To re-tension the chains
- Unfasten mounting screws (B) and
lock nut (C) slightly.
- Use the tensioning screw (D) to set the
required chain tightness.
- Retighten mounting screws (B) and
lock nuts (C) correctly.
The tensioning screws are accessed
A
through the bottom plates of the operat-
ing platform.
F 33 6
A
B
D
C
B
Advertisement
Table of Contents
