Fayat Group DYNAPAC SC2500WS Operating Instructions Manual page 285

Paver finisher
Table of Contents

Advertisement

The illuminated balloon generates shadow-reducing and anti-dazzle light.
f
The illuminated balloon makes the paver finisher higher and wider.
f
Note the passage height of bridges and tunnels and the enlarged vehicle width.
f
Always disconnect the power supply before working on the illuminated balloon!
f
Never look directly in the balloon when it is switched on!
f
The illuminated balloon must not be used in the vicinity of highly flammable materials
(e.g. petrol and gas); a safety distance of at least 1 metre must be maintained from
combustible materials.
f
Ensure that the area above the balloon is free and open without any power lines and
hindrances. There should be a linear distance of at least 50 m between overhead high
voltage power lines and the illuminated balloon. There should be a distance of
at least 2.5 m between overhead power lines and railway tracks with overhead lines
on the one hand, and the balloon on the other.
f
The illuminated balloon must not be operated if there is any damage to the electric
supply cables or connectors, the lamp or the balloon skin.
m
Never operate the balloon unsupervised or with a strong wind!
D 31 41

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dynapac sd2500w897898

Table of Contents