Audio - Axis Q6075-S User Manual

AXIS Q6075-S PTZ Network Camera
Configure your device
2. For Port 1:
2.1 Select Input.
2.2 Select Circuit closed.
Add a recipient:
3. Go to System > Events > Recipients and click Add recipient.
4. Type a name for the recipient.
5. Select Email.
6. Type an email address to send the email to.
7. The camera doesn't have it's own email server, so it will need to log into another email server to be able to send mails. Fill
in the rest of the information according to your email provider.
8. To send a test email, click Test.
9. Click Save.
Create a rule
10. Go to System > Events > Rules and add a rule.
11. Type a name for the rule.
12. In the list of conditions, under I/O, select Digital input.
13. In the list of ports, select Port 1.
14. In the list of actions, under Notifications, select Send notification to email.
15. Select a recipient from the list or go to Recipients to create a new recipient.
To create a new recipient, click
16. Type a subject and a message for the email.
17. Click Save.

Audio

Connect to a network speaker
Network speaker pairing allows you to use a compatible Axis network speaker as if it is connected directly to the camera. Once
paired, the speaker acts as an audio out device where you can play audio clips and transmit sound through the camera.
Important
For this feature to work with a video management software (VMS), you must first pair the camera with the network speaker,
then add the camera to your VMS.
Pair camera with network speaker
1. Go to System > Edge-to-edge > Pairing.
2. Type the network speaker's IP address, username and password.
3. Select Speaker pairing.
. To copy an existing recipient, click
23
.