Led Indicators - Axis Q6075-S User Manual

Hide thumbs Also See for Q6075-S:
Table of Contents

Advertisement

AXIS Q6075-S PTZ Network Camera
Specifications
4. When the pressure inside the camera housing reaches 0.5 bar (7 psi) the pressure relief valve will open. Place your hand
over the pressure relief valve to verify that the gas is flowing out.
5. Lift the pressure relief valve to let the overpressure out of the camera unit.
6. Repeat the filling process a total of 3 times, leaving the the camera pressurized the last time.
7. Put the caps back on the inlet valve and the pressure relief valve.

LED indicators

Note
The Status LED can be configured to flash while an event is active.
Note
The LEDs turn off when you close the casing.
Status LED
Unlit
Unlit
Green
Amber
Amber
Amber
Amber
Amber/Red
Amber/Red
Red
Green/Red
Red
Red
Red
Network LED
Green
Indication
Unlit for normal operation.
Connection and normal operation.
Connection and normal operation.
Shows steady green for 10 seconds for normal operation after startup completed.
Flashes green during wireless network pairing.
Steady green for normal operation.
Steady green for normal operation.
Flashes before startup if the temperature is below -20 °C and heating is required. The product
starts when it reaches operating temperature.
Steady during startup and when restoring settings.
Steady during startup, during reset to factory default or when restoring settings.
Steady during startup. Flashes during firmware upgrade or reset to factory default.
Steady during startup. Flashes when restoring settings.
Steady during startup. Flashes during firmware upgrade.
Flashes amber/red if network connection is unavailable or lost.
Flashes amber/red if network connection is unavailable or lost.
Steady for hardware error on the corresponding channel.
Flashes for identification purposes.
Slow flash for failed upgrade.
Firmware upgrade failure.
Flashes red for firmware upgrade failure.
Indication
Steady for connection to a 100 Mbit/s network. Flashes for network activity.
Steady for connection to a 1 Gbit/s network. Flashes for network activity.
72

Advertisement

Table of Contents
loading

Table of Contents