Audio - Axis P32 Series Manual

AXIS P32 Dome Camera Series
Configure your device
Create a rule:
11. Go to System > Events > Rules and add a rule.
12. Type a name for the rule.
13. In the list of conditions, under Video, select Tampering.
14. In the list of actions, under Notifications, select Send notification to email and then select the recipient from the list.
15. Type a subject and a message for the email.
16. Click Save.

Audio

Add audio to your recording
Turn on audio:
1. Go to Video > Stream > Audio and include audio.
2. If the device has more than one input source, select the correct one in Source.
3. Go to Audio > Device settings and turn on the correct input source.
4. If you make any changes to the input source, click Apply changes.
Edit the stream profile that is used for the recording:
5. Go to System > Stream profiles and select the stream profile.
6. Select Include audio and turn it on.
7. Click Save.
Add audio capability to your product using portcast
With portcast technology, you can add audio capability to your product. It allows audio and I/O communication digitally over the
network cable between the camera and the interface.
To add audio capability to your Axis network video device, connect the portcast compatible Axis audio device and I/O Interface
between your device and the PoE switch which provides power.
1. Connect the Axis network video device (1) and the Axis portcast device (2) with a PoE cable.
2. Connect the Axis portcast device (2) and the PoE switch (3) with a PoE cable.
1
Axis network video device
2 Axis portcast device
3
Switch
Once the devices are connected, an audio tab becomes visible in the settings for your Axis network video device. Go to the audio
tab and turn on Allow audio.
15