Table of Contents
Advertisement
AXIS Q6075-S PTZ Network Camera
Configure your device
Configure your device
Basic settings
Set the capture mode
1. Go to Video > Installation > Capture mode.
2. Click Change.
3. Select a capture mode and click Save and restart.
See also Capture modes on page 62.
Set the power line frequency
1. Go to Video > Installation > Power line frequency.
2. Click Change.
3. Select a power line frequency and click Save and restart.
Set the orientation
1. Go to Video > Installation > Rotate.
2. Select 0 , 90, 180 or 270 degrees.
See also .
Remote view setup (PTRZ)
Remote view setup lets you complete the installation of your camera without physically accessing it. You adjust the live view through
the web interface. The different movements are:
Pan - moves the camera side to side
Tilt - moves the camera up or down
Roll - rotates the lens about its center
The illustration shows how pan, tilt, and roll affect the live view.
7
Advertisement
Table of Contents
