Axis Q6075-S User Manual page 83

AXIS Q6075-S PTZ Network Camera
Specifications
1
Power wire (red)
2
Digital I/O wire (blue)
3
Ethernet wire (green/white)
4
Ethernet wire (green)
5
Ethernet wire (orange/white)
6
Ethernet wire (orange)
7
Digital I/O wire (yellow)
8
Ground wire (black)
9
Power wire (red)
10 Ethernet wire foil shield (2x)
11 Braided shield coil
Function
Configurable (Input
or Output)
RX+
RX-
TX+
TX-
0 V DC (-)
DC output (24 V)
The multicable provides the following connectors:
Power connector - 3-pin terminal block used for power input. Use a Safety Extra Low Voltage (SELV) compliant limited power source
(LPS) with either a rated output power limited to ≤100 W or a rated output current limited to ≤5 A.
Wire
2 – blue
7 – yellow
3 – green/white
4 – green
5 – orange/white
6 – orange
8 – black
1, 9 – red
Multicable overview
Connect to
Digital input – I/O terminal connector
Digital output – I/O terminal connector
Ethernet – receiving
Ethernet – receiving
Ethernet – transmitting
Ethernet – transmitting
Power connector
83
Specifications
0 to max 30 V DC
0 to max 30 V DC, open
drain, 100 mA
0 V DC
24 V DC