Audio - Axis P47-PLVE Series User Manual

AXIS P47-PLVE series
Configure your device

Audio

Add audio to your recording
Turn on audio:
1. Go to Video > Stream > Audio and include audio.
2. If the device has more than one input source, select the correct one in Source.
3. Go to Audio > Device settings and turn on the correct input source.
4. If you make any changes to the input source, click Apply changes.
Edit the stream profile that is used for the recording:
5. Go to System > Stream profiles and select the stream profile.
6. Select Include audio and turn it on.
7. Click Save.
Connect to a network speaker
Network speaker pairing allows you to use a compatible Axis network speaker as if it is connected directly to the camera. Once
paired, the speaker acts as an audio out device where you can play audio clips and transmit sound through the camera.
Important
For this feature to work with a video management software (VMS), you must first pair the camera with the network speaker,
then add the camera to your VMS.
Pair camera with network speaker
1. Go to System > Edge-to-edge > Pairing.
2. Type the network speaker's IP address, username and password.
3. Select Speaker pairing.
4. Click Connect. A confirmation message appears.
15