Table of Contents
Advertisement
AXIS Q6075-S PTZ Network Camera
Configure your device
Stabilize a shaky image with electronic image stabilization (EIS)
Electronic Image Stabilization (EIS) can be used in environments where the product is mounted in an exposed location and subject to
vibrations, for example, wind or passing traffic.
EIS makes the image smoother, steadier and less blurry. It also reduces the file size of the compressed image and lowers the
bitrate of the video stream.
Note
The image is cropped slightly when EIS is enabled, lowering the maximum resolution.
1. Go to Video > Installation > Image correction.
2. Turn on Image stabilization.
Verify the pixel resolution
To verify that a defined part of the image contains enough pixels to, for example, recognize license plates, you can use the pixel
counter.
1. Go to Video > Image.
2. Click
3. Click
4. In the camera's live view, adjust the size and position of the rectangle around the area of interest, for example where you
expect license plates to appear.
5. You can see the number of pixels for each of the rectangle's sides, and decide if the values are enough for your needs.
ABC 123
.
for Pixel counter.
13
Advertisement
Table of Contents
