Table of Contents
Advertisement
AXIS Q6075-S PTZ Network Camera
Configure your device
•
Go to Video > Stream > General and set the compression as low as possible.
•
Below the live view image, click
•
Go to Video > Stream > Zipstream and select Off.
Handle scenes with strong backlight
Dynamic range is the difference in light levels in an image. In some cases the difference between the darkest and the brightest
areas can be significant. The result is often an image where either the dark or the bright areas are visible. Wide dynamic range
(WDR) makes both dark and bright areas of the image visible.
Note
• WDR can cause artifacts in the image.
• WDR may not be available for all capture modes.
1. Go to Video > Image > Wide dynamic range.
2. Turn on WDR.
3. Use the Local contrast slider to adjust the amount of WDR.
4. Use the Tone mapping slider to adjust the amount of WDR.
5. To set the amount of WDR, select Low, Medium or High from the WDR level list.
6. If you still have problems, go to Exposure and adjust the Exposure zone to cover the area of interest.
Find out more about WDR and how to use it at axis.com/web-articles/wdr.
and in Video format, select MJPEG.
Image without WDR.
Image with WDR.
12
Advertisement
Table of Contents
