Table of Contents
Advertisement
AXIS Q6075-S PTZ Network Camera
Specifications
AXIS T8607 Media Converter Switch - external view
1
Cover
2
Network connector SFP (2x)
3
Network connector RJ45 (2x)
4
Camera network LED indicator
5
Network LED indicator (4x)
6
Power LED indicator
7
Power connector (DC input)
8
Grounding screw
9
Multicable inlet
10 I/O terminal connector
How to pressurize the camera (recommended)
The camera housing can be filled with Nitrogen gas to prevent condensation.
The filling process is repeated three times, releasing the pressure between fillings, to make sure that all air and humidity is purged
from the housing.
Note
The camera housing has an pressure relief valve that limits the filling pressure to 0.5 bar (7 psi). During normal use the
pressure inside the camera housing may drop below that pressure. For full protection make sure that the pressure is above
0.2 bar (3 psi) .
1. Set the regulator gauge on the gas cylinder to 0.5 bar (7 psi).
2. Remove the caps from the inlet valve and the pressure relief valve.
3. Place the chuck on the inlet valve and press down to fill the camera with nitrogen.
71
Advertisement
Table of Contents
