Table of Contents
Advertisement
AXIS Q6075-S PTZ Network Camera
Configure your device
Note
If you use a DC iris, manual iris or optional i-CS lens there is no need to select a lens driver.
7. For the changes to take effect, you need to restart the device. Go to Maintenance and click Restart.
8. Adjust the zoom and focus.
Note
For a lens with P-Iris, DC-iris, or manual iris, manually adjust the focus on the lens before you fine-tune the focus through
the web interface.
Adjust the image
This section includes instructions about configuring your device. If you want to learn more about how certain features work, go
to Learn more on page 62.
Configure the quad view
Note
Quad view is available in these mounting positions:
• Desk
• Ceiling
1. Click
2. Select Quad view among the live feed sources.
3. Go to Settings > System > Orientation and click
4. To change the view order, drag and drop the yellow boxes.
Level the camera
To adjust the view in relation to a reference area or an object, use the level grid in combination with a mechanical adjustment
of the camera.
1. Go to Video > Image > and click
2. Click
3. Adjust the camera mechanically until the position of the reference area or the object is aligned with the level grid.
Adjust the focus
This product has three focus modes:
•
Auto: The camera automatically adjusts focus based on the entire image.
•
Area: The camera automatically adjusts focus based on a selected area of the image.
•
Manual: The focus is set manually at a fixed distance.
To turn off autofocus and adjust the focus manually:
1. In the live view window, if the Zoom slider is visible, click Zoom and select Focus.
and select Legacy device interface.
to show the level grid.
.
.
9
Advertisement
Table of Contents
