Table of Contents
Advertisement
AXIS M5000 PTZ Camera
Configure your device
13. Set the postbuffer time to 50 seconds.
14. Click Save.
Use PIR and audio to deter intruders
This example explains how to set up the camera to play an audio clip with a barking dog when the PIR sensor detects movement
outside office hours.
Before you start:
•
Add an audio clip with a barking dog to the device. For more information, see Audio clips on page 30.
Create a rule:
1. Go to System > Events and add a rule.
2. Enter a name for the rule.
3. In the list of conditions, select Device status > PIR sensor.
4. Click + to add a second condition.
5. In the list of conditions, select Scheduled and recurring > Schedule.
6. In the list of schedules, select After hours .
7. In the list of actions, select Audio clips > Play audio clip.
8. In the list of clips, select Dog barking.
9. Click Save.
Audio
Add audio to your recording
Turn on audio:
1. Go to Video > Stream > Audio and include audio.
2. If the device has more than one input source, select the correct one in Source.
3. Go to Audio > Device settings and turn on the correct input source.
4. If you make any changes to the input source, click Apply changes.
Edit the stream profile that is used for the recording:
5. Go to System > Stream profiles and select the stream profile.
6. Select Include audio and turn it on.
7. Click Save.
14
Advertisement
Table of Contents
