Usb 2.0 Driver Installation - SOLTEK SL-K8T-939FL Manual

SL-K8T-939FL

3-3 USB 2.0 Driver installation

VIA USB V2.0 is already integrated on board. Its 480Mb/s transfer rate
supports operating systems Windows 98SE/ME/2000/XP. USB2.0
Driver is typically for Windows 98SE/ME. For Windows 2000/XP, users
can install their latest Service Pack instead of the USB2.0 driver to gain
the USB2.0 support. For the Windows system which is not installed
with its latest Service Pack, users must install the USB2.0 driver to
activate the USB2.0 support:
1. Following the procedures of opening the Support CD, click to choose
"VIA USB 2.0 Driver" to proceed. Please notice that the USB card
driver is different from the USB 2.0 driver typically for the on-board
USB. Do not use the USB card driver here.
2. Instantly the "USB 2.0 Setup Program" will pop up on screen. Click
"Next" to continue.
Chapter 3 Software Setup
Next
38