Table of Contents
Advertisement
SL-K8T-939FL
Chapter 4 BIOS Setup
Boot Up NumLock
Toggle between On or Off to control the state of
Status
the NumLock key when the system boots. If On,
the numeric keypad is in numeric mode. If off, the
numeric keypad is in cursor control mode.
Typematic Rate Setting When Disabled, the following two items (Typematic
Rate and Typematic Delay) are irrelevant. Keystroke
repeats at a rate determined by the keyboard con-
troller in your system.
When Enabled, you can select a typematic rate and
typematic delay.
X Typematic Rate
When the typematic rate setting is enabled, you can
(Chars / Sec)
select a typematic rate (the rate at which character
repeats when you hold down a key) of 6, 8, 10, 12,
15, 20, 24, or 30 characters per second.
X Typematic Delay
Choices: 250; 500; 750; 1000. This option sets the
(Msec)
time interval for displaying the first and the second
characters. If enabled, the time interval is optional.
Security Option If you have set a password, select whether the
password is required every time the System
boots, or only when you enter setup.
Choices: System; Setup(default)
APIC Mode To enable / disable the APIC mode.
OS Select For DRAM >
Select OS2 only if you are running OS/2 operating
64MB
system with greater than 64MB of RAM on your
system.
Video BIOS Shadow To enable / disable Video BIOS Shadow function.
To enable the function will copy Video BIOS to
shadow RAM to improve performance.
57
Advertisement
Table of Contents
