4-6.5 Integrated Peripherals; 4-6.5.1. Via Onchip Ide Device - SOLTEK SL-K8T-939FL Manual

SL-K8T-939FL
Memory Hole To enabled / disabled (default) the support of
VLink Data Rate To set VLink Data Rate.
Init Display First Initialize the AGP video display before initializing any
System BIOS
Cacheable

4-6.5 Integrated Peripherals

Choose "Integrated peripherals" from the Main Menu and a list of options
will appear:
VIA onChip IDE Device
VIA onChip PCI Device
Super IO Device
: Move Enter: Select
F5: Previous Values

4-6.5.1. VIA OnChip IDE Device

To press< Enter > on VIA OnChip IDE Device will reveal the following
item(s).
OnChip SATA
SATA Mode
IDE DMA transfer access
OnChip IDE Channel10
OnChip IDE Channel11
IDE Prefetch Mode
Primary Master PIO
Primary Slave PIO
Secondary Master PIO
Secondary Slave PIO
Primary Master UDMA
Primary Slave UDMA
Secondary Master UDMA
Secondary Slave UDMA
IDE HDD Block Mode
Memory Hole which is reserved for ISA card.
Choices: Disabled; 15MB-16MB
Choices: 8X; 4X
other display device on the system. Thus the AGP
display becomes the primary display.
Selecting Enabled allows caching of the system
BIOS ROM at F0000h-FFFFFh, resulting in better
system performance.
Phoenix - AwardBIOS CMOS Setup Utility
Integrated Peripherals
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
Enabled
IDE
Enabled
Enabled
Enabled
Enabled
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Enabled
Press Enter
Press Enter
Press Enter
Esc: Exit
F7: Optimized Defaults
60
Chapter 4 BIOS Setup
Item Help
F1: General Help
Item Help