Jumper Setting; 2-9.1 How To Tackle The Jumpers - SOLTEK SL-K8T-939FL Manual

SL-K8T-939FL

2-9 Jumper Setting

2-9.1 How to tackle the Jumpers:

1
If a pin-header (of 2 or more pins) is
designed in such a way that its pins
can be closed or linked together to
set up a specific function, this header
is called a jumper in this manual.
• A Jumper is usually but not necessarily given a "JpX" legend.
• In the Jumper setting diagram, all jumper pins covered with
black marks stand for closed pins with jumper cap.
1
Jp X
Jumper with
Pin 2-3 closed
• Do not remove any jumper cap when power is on. Always
make sure the power is off before changing any jumper
settings. Otherwise, mainboard could be damaged.
2 3
A 3-pin Jumper
3
Chapter 2 Hardware Setup
A 2-pin
Jumper
Cap
The conductor inside the cap
links two header-pins together.
1 3
Jumper with
all pins open
24
1 3
Jumper with
Pin 1-2 closed