Table of Contents
Advertisement
SL-K8T-939FL
DRAM Configuration:
To press< Enter > on DRAM Configuration will reveal the following item(s).
Current FSB Frequency BIOS shows the actual Front Side Bus frequency.
Current DRAM Frequency BIOS shows the actual DRAM frequency.
Max Memclock (Mhz) To manually set the memory clock if you have set
1T/2T Memory Timing To manually/ automatically set the DDR Timing.
CAS# LATENCY(Tcl) Automatically set CAS# latency.
RAS# to CAS# delay
Min RAS# active time Choose the minimum RAS active time.
Row Precharge Time
LDT & PCI Bus Control:
To press< Enter > on LDT & PCI Bus Control will reveal the following
item(s).
Upstream LDT Bus
Downstream LDT Bus
LDT Bus Frequency To set LDT Bus Frequency.
PCI1 Master 0 WS
PCI2 Master 0 WS
PCI1 Post Write To enable (default) / disable the support of PCI1 Post
PCI2 Post Write To enable (default) / disable the support of PCI2
"by manual" in above option.
Choice: 100; 133; 166
Choose the RAS to CAS delay time.
(Trcd)
Choices: Auto; 2; 3; 4; 5; 6; 7
Choices: Auto; 5; 6; 7; 8; 9; 10; 11; 12; 13; 14; 15
Choose the Row Precharge time.
(Trp)
Choices: Auto; 2; 3; 4; 5; 6
To set Upstream LDT BUS Width.
Width
Choices: 8 bit; 16 bit
To set Downstream LDT BUS Width.
Width
Choices: 8 bit; 16 bit
Choices: 200MHz; 400MHz; 600MHz; 800MHz;1G
To enable (default) / disable the support of PCI1
Write
Master 0 Wait State Write.
To enable (default) / disable the support of PCI2
Write
Master 0 Wait State Write.
Write.
Post Write.
59
Chapter 4 BIOS Setup
Advertisement
Table of Contents
