Via 4-In-1 Drivers Installation - SOLTEK SL-K8T-939FL Manual

SL-K8T-939FL

3-2 VIA 4-IN-1 Drivers Installation

1. Following the procedures of opening the Support CD, click to " VIA 4-
in-1 Drivers" to proceed.
2 . T h e V I A S e r v i c e P a c k
InstallShield Wizard will pop up
to guide you to the VIA Service
pack installation. Click "Next"
button to continue.
4. On the screen below, check
"Normally Install" and click
"Next" to continue. (If you
check "Quick Install", you will
skip the detailed procedures of
the VIA 4-in-1 Setup.)
Next
Next
36
Chapter 3 Software Setup
3. "VIA Service Pack README"
screen will appear, please click
the "Yes" button to agree with
the Licence Agreement and
continue.
5. Select the checkbox as below
and click "Next" to continue:
VIA PCI IDE Bus Driver
AGP Driver (AGP 3.0 Supported)
VIA INF Driver 1.90b
Ye s
Next