4-6.4 Advanced Chipset Features - SOLTEK SL-K8T-939FL Manual

SL-K8T-939FL

4-6.4 Advanced Chipset Features

Choose "Advanced Chipset Features" from the Main Menu and a
list of option will appear:
AGP & P2P Bridge Control
DRAM Configuration
LDT & PCI Bus Control
Memory Hole
VLink DATA Rate
Init Display First
System BIOS Cacheable
: Move Enter: Select
F5: Previous Values
AGP & P2P Bridge Control:
To press< Enter > on AGP & P2P Bridge will reveal the following item.
AGP Aperture Size Options: 32; 64; 128; 256M. Memory mapped and
AGP 3.0 mode To show the AGP onboard mode.
AGP Driving Control To automatically/manually set AGP Driving Control.
AGP Driving Value To input AGP Driving Value if you have set "Manual"
AGP Fast Write This item will enable the AGP mode into fast write
AGP Master 1 WS
AGP Master 1 WS
AGP3.0 Calibration To enable / disable of support
DBI Output for AGP
Phoenix - AwardBIOS CMOS Setup Utility
Advanced Chipset Features
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
graphics data structures can reside in a Graphics
Aperture. This area is like a linear buffer. BIOS will
automatically report the starting address of this buffer
to the O.S.
in above item.
Choices: 00~FF in 01 stepping
mode. If your graphics card does not support this
function, please do not enable this function.
To enable / disable the support of AGP Master 1
Write Waite State Write.
To enable / disable the support of AGP Master 1
Read Waite State Read.
To auto-detect / disable the DBI Output for AGP
Trans transfer.
Press Enter
Menu Level
Press Enter
Press Enter
DRAM timing and control
Disabled
8X
AGP
Disabled
58
Chapter 4 BIOS Setup
Item Help
Esc: Exit F1: General Help
F7: Optimized Defaults