Table of Contents
Advertisement
13.If the gear is not in neutral by moving the remote control lever
from the "R" (Reverse) to the "N" (Neutral) position, remove the
shift side cable and move the inner cable toward the mark (B) (1).
Repeat the procedure from the step 8.
14.After adjustment, check operation of each lever. If the gear is not
in neutral securely, perform steps 12 or 13 again.
THROTTLE CABLE CONNECTION
• Before connecting the throttle control cable, check that the cable
is connected to the remote control box side properly.
1. Install the throttle pivot (1) to the shift control cable.
Apply
grease to the mating surface of the throttle arm
marine
pivot.
Install the throttle control cable pivot to the throttle arm (2).
Lock the lock plate (3) by sliding it to the groove of the shift link.
2. Move the remote control lever (1) to the full throttle position (2).
BF175AK3/BF200AK3/BF225AK3/BF250A
ADJUSTMENT
RANGE
(1)
(3)
(1)
(2)
(1)
(2)
"N"
(NEUTRAL)
25
Advertisement
Table of Contents
