N
1
R
5
6
F
2
3
4
b
Shift/Throttle cable adjustment
1.
Place shift lever 1 at neutral position.
Shift lever cannot work unless
throttle is fully closed. Do not force
the shift.
2.
Set shift arm 2 to forward (F), neutral (N),
reverse (R) and then to neutral (N) positions.
3.
Set throttle cam 3 to full close position.
4.
Adjust screw-in length of cable joint 4 so that
hole of cable joint is brought to throttle arm pin
and shift arm pin 5.
Screw-in remote control cable joint
at least 12 mm b.
• Cable joints are in the outboard
box.
• After adjusting remote control
cable joint, fix it with remote
control cable fully pushed in.
CAUTION
WARNING
2016 Installation Manual