Fluke Versiv Series User Manual page 77

Versiv Series Cabling Certification Product Family
Users Manual
64
Find Quality Products Online at:
 The name of the outlet configuration used for the test. The
outlet configuration is a setting on the TEST SETUP screen.
The wire map of the cabling. The main tester is at the left side

of the wire map.
 Tap to see information about wire map faults. If
shows, tap it to see a message about the results, such as Bad
patch cord at remote.
 The overall result for the Autotest. If the result shows an
asterisk, See "PASS*/FAIL* Results" on page 61.
The result for the wire map test:

The wire map does not agree with the outlet configuration
selected for the test.
The wire map agrees with the outlet configuration selected
for the test.
When more than one button shows at the bottom of the

screen, the tester highlights one in yellow to recommend
which one to tap. See "Buttons to Do Tests and Save Results"
on page 22.
GlobalTestSupply
www. .com
sales@GlobalTestSupply.com