Fluke Versiv Series User Manual page 61

Versiv Series Cabling Certification Product Family
Users Manual
48
Find Quality Products Online at:
Table 3. Settings for Twisted Pair Tests(cont.)
Outlet Configu-
The Outlet Configuration specifies which wire pairs are
ration
tested and which wire numbers the wire map shows for the
pairs. See Figures 14 and 15.
To see the wire map for a configuration, tap Outlet
Configuration, tap the configuration name on the OUTLET
CONFIG screen, then tap SAMPLE.
To select a configuration, tap a name on the OUTLET
CONFIG screen, then tap USE SELECTED.
The OUTLET CONFIG screen shows only the
configurations that are applicable to the
selected Test Limit.
To make a custom outlet configuration, tap CUSTOM on
the OUTLET CONFIG screen, then tap MANAGE, then tap
Create.
AC Wire Map
The AC Wire Map test lets you do tests on links connected
through midspan PoE (Power over Ethernet) devices. See
the Technical Reference Handbook.
When the AC Wire Map test is on, this icon shows on the
home screen:
Always turn off the AC wire map test when you
will not do tests through a PoE device. The AC
wire map test increases the time for an
Autotest. It also disables the resistance and
shield continuity tests.
The DSX-8000 modules do not support the AC
wire map test.
GlobalTestSupply
www.
Note
Notes
.com
sales@GlobalTestSupply.com