Fluke Versiv Series User Manual page 354

Versiv Series Cabling Certification Product Family
Users Manual
348
Find Quality Products Online at:
If no address is associated with the name, or if you enter a
different address on the LWL SIGN IN screen, the tester associates
the name with the address you enter.
On the home screen, tap the SYNC icon.
3
Select a wireless network if necessary.
4
•
If a notice about additional information shows
Tap OK, then enter the required credentials on the
REDIRECTED LOGIN screen and log in. If another
REDIRECTED LOGIN screen shows after you log in, tap
DONE on that screen.
•
If the NETWORK screen shows
The network settings are not correct. To change the settings:
a. Tap the Wi-Fi panel, then change the settings as
necessary. Table 10 on page 354 describes the Wi-Fi
settings.
b. To test the settings, go back to the WI-FI PORT screen,
then tap CONNECT.
When the tester connects to the network, the Wi-Fi
network connection icon shows at the top of the
screen:
c. On the home screen, tap SYNC.
On the LWL SIGN IN screen enter the ID and password for your
5
LinkWare Live account, then tap SIGN IN.
If you use other people's LinkWare Live accounts, the
6
ORGANIZATION screen shows. Tap the organization you want
to use.
On the SYNC PROJECTS screen (Figure 129), select the projects
7
you want to sync, then tap SYNC.
GlobalTestSupply
www. .com
sales@GlobalTestSupply.com