Fluke Versiv Series User Manual page 188

Versiv Series Cabling Certification Product Family
Users Manual
178
Find Quality Products Online at:
To enter the length of the test reference cord you will add to
1-9
connect to the fiber under test, tap TRC LENGTH on the SET
REFERENCE screen. The length you enter does not change the
test results. The tester saves the length with the results to meet
TIA reporting requirements.
1-10 Tap SET REFERENCE.
If reference values are unacceptable, you can use the
FiberInspector probe to inspect connectors. To turn on the
probe, press the button on the probe. To go back to the
reference screen, tap
1-11 If you did not use the connection wizard, go to step 3.
GlobalTestSupply
www.
.
.com
sales@GlobalTestSupply.com