Fluke Versiv Series User Manual page 201

Versiv Series Cabling Certification Product Family
Users Manual
192
Find Quality Products Online at:
 LCD display with touchscreen.
single-mode OTDR port with interchangeable SC adapter and

protective cap. The LED in front of the port turns on when the
port emits an optical signal.
W
Do not connect APC (angled physical contact)
connectors to the OTDR ports. Doing so can damage
the port's endface, and the large reflection at the
OTDR port can cause unreliable test results.
 Multimode OTDR port with interchangeable SC adapter and
protective cap. The LED in front of the port turns on when the
port emits an optical signal.
Visual fault locator port and protective cap. The LED in front of

the port turns on when the port emits an optical signal.
W
Do not look directly into optical connectors. Some
sources emit invisible radiation that can cause
permanent damage your eyes.
Button that controls the VFL.

 Micro USB port: This USB port lets you connect the tester to a PC
so you can upload test results to the PC and install software
updates in the tester.
 Type A USB port: This USB host port lets you save test results on a
USB flash drive and connect the FiberInspector Pro video probe
to the tester. On a Versiv main tester, this port lets you or connect
a Wi-Fi adapter for access to the Fluke Networks cloud service
LinkWare Live. (Versiv 2 testers have an internal Wi-Fi radio.)
GlobalTestSupply
www.
Caution
*
Warning
.com
sales@GlobalTestSupply.com