Fluke Versiv Series User Manual page 125

Versiv Series Cabling Certification Product Family
Users Manual
114
Find Quality Products Online at:
 PROJECT: The project contains the settings for a job and helps
you monitor the status of a job. When you save test results, the
tester puts them in the project. Tap the PROJECT panel to edit
the project settings, select a different project, or make a new
project.
 With TEST LIMIT not set to DOCUMENT ONLY, shows a
summary of the test results in the project:
: The number of tests that passed.
: The number of tests that failed.
The test setup panel shows the settings the tester uses when

you tap TEST or push .
To change these settings, tap the panel.
You can set up tests for any module that the
tester can use, even with no module installed.
 Next ID: The Next ID panel shows the ID that the tester gives
to the next test results you save.
GlobalTestSupply
www.
Note
.com
sales@GlobalTestSupply.com