Fluke Versiv Series User Manual page 147

Find Quality Products Online at:
 Input port with removable connector adapter and dust cap.
This port receives optical signals for loss, length, and power
measurements.
Multimode output port with removable connector adapter and

dust cap. This port transmits optical signals for loss and length
measurements.
The LED below the output port is red when the port transmits
850 nm and green for 1300 nm.
 Universal fiber connector (with dust cap) for the visual fault
locator. The connector accepts 2.5 mm ferrules. The LED
below the connector shows the locator's mode.
 Button to manually control the output ports (
the visual fault locator (
 Micro USB port: This USB port lets you connect the tester to a
PC so you can install software updates in the tester.
Headset jack

 : Starts a test.
: Power key

 : Press  to use the headset to speak to the person at
the other end of the link. Press again to adjust the volume. To
turn off the talk function, hold down .
 Connector for the AC adapter. The LED is red when the
battery charges, and green when the battery is fully charged.
The LED is yellow if the battery will not charge. See "Charge
the Battery" on page 14.
 Decal with laser safety
information.
GlobalTestSupply
www.
Certify Fiber Cabling
Connectors, Keys, and LEDs
 and
 ).
.com
 ) and
137
sales@GlobalTestSupply.com