Fluke Versiv Series User Manual page 280

Find Quality Products Online at:
Hidden events:
: The event is hidden by a previous event.
The map shows a dotted line around hidden events and the
event that causes them to be hidden. The tester combines the
loss of all the events that are in the dotted line. To see the
combined loss, tap the event that causes the hidden event.
(  ). The tester does not show loss measurements for hidden
events.
: The event is hidden by a previous event. The reflectance
of the event exceeds the limit. This icon shows only when the
test limit has a limit for reflectance.
:The cause of the hidden event. The loss of the second
connector is hidden in the attenuation dead zone of the first
connector.
 When more than one button shows at the bottom of the screen,
the tester highlights one in yellow to recommend which one to
tap.
 The fiber type and test limit the tester used for the test, and the
ID the tester will use for the next results that you save.
 When a test is completed, the window shows information for the
event that has the worst measurement. The information
windows show the worst results of the wavelengths used for the
test.
If the window border is green, the measurements for the event
do not exceed the limits.
If the window border is red, a measurement exceeds the limits.
If the window border is blue, the tester does not give a pass or
fail result to the event because it cannot do a full analysis of the
event. This occurs for OTDR Port, Hidden, and End events. This
occurs for all events if you use the Document PON test limit
because Document PON does not have values for limits.
GlobalTestSupply
www.
Use the HDR OTDR
HDR OTDR Results
271
.com
sales@GlobalTestSupply.com