Fluke Versiv Series User Manual page 151

Find Quality Products Online at:
 Operator: The name of the person who does the job. You can
enter a maximum of 20 operator names. For each operator
you can also enter the email address that the operator will use
as an ID to sign in to LinkWare Live.
 TOOLS: The TOOLS menu lets you set the reference for fiber
tests, see the status of the tester, and set user preferences
such as the language and the display brightness.
 SET REF: Tap SET REF to set the reference and verify your test
reference cords for loss/length tests.
RESULTS: Tap RESULTS to see and manage the results that are

saved in the tester.
 SYNC: Tap SYNC to sync projects with LinkWare Live.
TEST: Tap TEST to do the test shown in the test setup panel.

 % Tested: The percentage of the tests in the project that are
completed. The tester uses the number of available IDs to
calculate this percentage. See Figure 128 on page 341.
% Tested does not show if your project contains only a Next ID
list. See "About Next ID Sets" on page 340 for more information
about the Next ID list.
 The type of module attached to the tester.
 This icon shows when the input and output ports on
the tester's CertiFiber Pro module are connected to the ports
on the remote's CertiFiber Pro module, the remote tester is
turned on, and Smart Remote or Loopback mode is selected.
GlobalTestSupply
www.
Certify Fiber Cabling
The CertiFiber Pro Home Screen
.com
sales@GlobalTestSupply.com
141