Table of Contents
Advertisement
9.6.1 MIB File
The SNMP MIB file includes all the device data objects required to read the device on a SNMP
system. The MIB file of the AcuLink 810 can be downloaded directly from the web interface
in the SNMP page. When downloading the SNMP file it will be downloaded as a zip folder
including the individual MIB files are all device models on the AcuLink 810.
9.7 MBus
The AcuLink supports MBus devices, where the user can add MBus devices to the AcuLink
810 via an Mbus TCP/IP master. Mbus meters are typically used for reading water, gas and
electricity.
9.7.1 Adding MBus Device
To add an MBus device select MBus under the Devices tab.Users will first need to add the
MBus master device, click on Add Device .
Enter in the following:
Master Name: Enter the master name
Master IP Address: Enter the IP address of the master device
Master Port: Enter the port number for the master device, the range is 1-65535.
Click on Save once complete.
www.accuenergy.com
Chapter 9: Protocols
V: 1.08 Revised: May 2020
83
Advertisement
Table of Contents
