Table of Contents
Advertisement
8.3 Remote Access
The AcuLink 810 supports a remote access function that allows users to access the AcuLink
810 web interface. By accessing the interface remotely users will have full functionality
as well as access to all gateway settings and device readings. This feature allows users to
access the AcuLink 810 web interface through an HTTPS web server easily through a URL
without any network port forwarding. Users simply register for remote access on the web
server and a remote access URL is provided where they can configure settings and view me-
ter data. This is useful as the gateway device may be installed on remote sites where the end
user may be miles away from the actual device.
The remote access configuration can be found on by clicking on the System Settings tab
and selecting Remote Access .
Users must first register for remote access by clicking on Manual Register . Once successful-
ly registered, enable remote access and click on Save .
NOTE: In order to successfully register for remote access there must be an internet connec-
tion provided to the AcuLink 810.
www.accuenergy.com
Chapter 8: System Settings
V: 1.08 Revised: May 2020
43
Advertisement
Table of Contents
