Adding Bacnet Ms/Tp Device - AccuEnergy AcuLink 810 User Manual

Chapter 9: Protocols
BACnet MS/TP via USB
RS485-USB Converter
AcuRev 1310 BACnet MS/TP
D A T A A C Q U S I T I O N S E R V E R

9.4.2 Adding BACnet MS/TP device

With the BACnet MS/TP protocol selected for either USB and/or RS485, users can add a BAC-
net device to the AcuLink 810 on the BACnet Devices page located under the Devices tab.
Click on Add Device , the following fields will need to be configured:
• Device Name: Enter the device name of the meter
• Serial Number: Enter the serial number of the device, the serial number must be unique
and consisting of only letters and numbers.
69
V: 1.08 Revised: May 2020
www.accuenergy.com