Table of Contents
Advertisement
7.1.2 New Template
Under the New Template tab users can create and build their own Modbus template. There
are four steps required in building the template which include 1) Device Info, 2) Create
Block, 3) Create Parameter, and 4) Save
1. Device Information
Users will need to enter in a Device Model, which must be a unique model name, They will
also need to enter in a device version which must also be unique.
Click on Save Device Info once the information has been entered correctly.
2. Create Block
The second step includes creating the register blocks for the Modbus Device.
• Select the Modbus Function Code of the register block (i.e. Read Holding Registers,
Read Discrete Input, Read Coils, read Input Registers)
• Enter in the starting address of the register block, this address must be in hexadecimal.
• Enter the count, i.e. the number of registers in this block.
www.accuenergy.com
Chapter 7: Device Templates
V: 1.08 Revised: May 2020
25
Advertisement
Table of Contents
