Table of Contents
Advertisement
Chapter 13: Data Logging
13.4 AcuCloud
This chapter will provide instructions on connecting the AcuLink 810 gateway device to the
AcuCloud EMS software so that the selected devices connected to the gateway can send their
data to the software. This process requires the user to have an existing AcuCloud account, if
the user does not have an account they can sign up for AcuCloud directly on our website at:
https://www.accuenergy.com/products/acucloud-energy-management-software-ems/
This procedure requires users to add the gateway to the software in which a token will be
generated through AcuCloud and will act as verification when sending data from the gate-
way . Finally this generated token will be used to configure the gateway from the AcuLink
810 web interface.
Once the token has been successfully added, the user will be able to monitor, compare and
trend the data from devices connected to the gateway.
NOTE: Only Modbus devices connected to the AcuLink 810 can be posted to AcuCloud.
Under the Data Log tab select AcuCloud , the user will first need to select Enable under
AcuCloud Enable.
• Then copy the Module Serial Number that appears below.
103
V: 1.08 Revised: May 2020
www.accuenergy.com
Advertisement
Table of Contents
