Table of Contents
Advertisement
13.2.2 FTP Post Method
The FTP post method allows the user to post meter data to an FTP server.
Post Channel Enable: Select Enable to enable the post channel data forward
Post Method: Select FTP protocol
FTP URL: Enter in the FTP URL
FTP Port: Enter the FTP port number
FTP Username: Enter the username to access the FTP server
FTP Password: Enter the password to access the FTP server
Once all settings are entered correctly, click on Save . Users can use the Test Post Channel
button to determine whether the 810 can reach the FTP server.
NOTE: If users receive a fail message, please verify the server URL, port number, username,
password and double-check the network connectivity.
Similar to the HTTP posting method, for FTP if the AcuLink 810 loses its network connection
the gateway can back up 3000 post files on its internal memory, after 3000 post files the
data will start to over write from the oldest post file. Users can clear the cached post files by
using the Clear Post Channel Logs button.
www.accuenergy.com
Chapter 13: Data Logging
V: 1.08 Revised: May 2020
101
Advertisement
Table of Contents
