Table of Contents
Advertisement
32.2mm
(1.27")
Chapter 4: Installation
4.1 Installation Checklist
The following materials are required for the AcuLink 810 installation:
• AcuLink 810 Data Acquisition Server
• Ethernet Cat 5 Cable (Required for LAN or direct computer to AcuLink 810 connection)
• Power Supply (24V)
• WIFI Antenna
4.1.1 Optional Hardware:
• Additional Modbus RTU devices
• 2 wire Modbus/RS485 connection
4.1.2 LAN Information
• Ethernet 10/100MB connection point (router/switch)
• IP address and subnet mask (Check with system administrator)
• Gateway Address (Check with system administrator)
• DNS server address (Check with system administrator)
www.accuenergy.com
159.9mm (6.3")
Chapter 4: Installation
10mm
35mm
6.8mm
32.2mm
(1.27")
V: 1.08 Revised: May 2020
9
Advertisement
Table of Contents
